ZyXEL Communications ZyWall USG 2000 User Manual page 453

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Click AppPatrol to open the following screen.

Figure 332 AppPatrol > General

The following table describes the labels in this screen. See

for more information as well.

Table 128 AppPatrol > General

Priority for

Registration

Registration

Registration

ZyWALL USG 2000 User's Guide

Select this check box to turn on application patrol.

This is a global setting for enabling or disabling bandwidth management

on the ZyWALL. You must enable this setting to have individual policy

routes or application patrol policies apply bandwidth management.

This same setting also appears in the Network > Routing > Policy

Route screen. Enabling or disabling it in one screen also enables or

disables it in the other screen.

Select this to maximize the throughput of SIP traffic to improve SIP-

based VoIP call sound quality. This has the ZyWALL immediately send

SIP traffic upon identifying it. The ZyWALL ignores any other application

patrol rules for SIP traffic (so there is no bandwidth control for SIP

traffic). When this option is enabled the ZyWALL also does not record

SIP traffic bandwidth usage statistics.

The following fields display information about the current state of your

subscription for IDP/application patrol signatures.

This field displays whether a service is activated (Licensed) or not (Not

Licensed) or expired (Expired).

This field displays whether you applied for a trial application (Trial) or

registered a service with your iCard's PIN number (Standard). None

displays when the service is not activated.

This link appears if you have not registered for the service or only have

the trial registration. Click this link to go to the screen where you can

Chapter 29 Application Patrol

Section 29.3.1 on page

Troubleshooting

Zywall usg 1000