Address Group Add/Edit Screen - ZyXEL Communications ISG50-ISDN User Manual

Chapter 45 Addresses
The following table describes the labels in this screen. See
information as well.
Table 240 Configuration > Object > Address > Address Group
LABEL
Add
Edit
Remove
Object
References
#
Name
Description

45.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen (see
click either the Add icon or an Edit icon.
Figure 412 Configuration > Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 241 Configuration > Object > Address > Address Group > Add
LABEL
Name
Description
616
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's
settings.
To remove an entry, select it and click Remove. The ISG50 confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which
settings use the entry. See
This field is a sequential value, and it is not associated with a specific address
group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
This field displays the description of each address group, if any. You can use up to
60 characters, punctuation marks, and spaces.
Section 45.3.1 on page 616
Section 12.3.2 on page 246
for more
for an example.
Section 45.3 on page 615), and
ISG50 User's Guide