The Virtual Server Add/Edit Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Table 86 Network > Virtual Server (continued)
LABEL
Original IP
Mapped IP
Protocol
Original Port
Mapped Port
Add icon
Apply
Reset

16.2.1 The Virtual Server Add/Edit Screen

The Virtual Server Add/Edit screen lets you create new virtual servers and edit
existing ones. To open this window, open the Virtual Server summary screen.
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field displays the original destination IP address (or address object)
of packets for the virtual server. It displays any if there is no restriction
on the original destination IP address.
This field displays the new destination IP address for the packet.
This field displays the service used by the packets for this virtual server.
It displays any if there is no restriction on the services.
This field displays the original destination port(s) of packets for the
virtual server. This field is blank if there is no restriction on the original
destination port.
This field displays the new destination port(s) for the packet. This field is
blank if there is no restriction on the original destination port.
This column provides icons to add, edit, and remove virtual servers. In
addition, you can activate and deactivate virtual servers.
To add a virtual server, click the Add icon at the top of the column. The
Virtual Server Add/Edit screen appears.
To activate / deactivate a virtual server, click the Active icon next to the
virtual server.
To edit a virtual server, click the Edit icon next to the virtual server. The
Virtual Server Add/Edit screen appears.
To delete a virtual server, click on the Remove icon next to the virtual
server. The Web Configurator confirms that you want to delete it before
doing so.
Click this button to save your changes to the ZyWALL.
Click this button to return the screen to its last-saved settings.
Chapter 16 Virtual Servers
275