Trunks; Ipsec Vpn; Ssl Vpn - ZyXEL Communications ZyWall USG 2000 User Manual

Most of the features that use interfaces support Ethernet, PPPoE/PPTP, cellular,
VLAN, and bridge interfaces.
MENU ITEM(S)
PREREQUISITES
WHERE USED
Example: Interface ge1 is in the LAN zone and uses a private IP address. To
configure ge1's settings, click Network > Interface > Ethernet and then ge1's
Edit icon.

5.4.3 Trunks

Use trunks to set up load balancing using two or more interfaces.
MENU ITEM(S)
PREREQUISITES
WHERE USED
Example: See

5.4.4 IPSec VPN

Use IPSec VPN to provide secure communication between two sites over the
Internet or any insecure network that uses TCP/IP for communication. The
ZyWALL also offers hub-and-spoke VPN.
MENU ITEM(S)
PREREQUISITES
WHERE USED
Example: See

5.4.5 SSL VPN

Use SSL VPN to provide secure network access to remote users.
MENU ITEM(S)
ZyWALL USG 2000 User's Guide
Network > Interface (except Network > Interface > Trunk)
Port groups (configured in the Interface > Port Grouping screen)
Zones, trunks, IPSec VPN, device HA, DDNS, policy routes, static
routes, HTTP redirect, virtual server, application patrol
Network > Interface > Trunk
Interfaces
Policy routes
Chapter 6 on page 103.
VPN > IPSec VPN; you can also use the VPN Setup Wizard, which
handles most of the prerequisites for you.
Interfaces, certificates (authentication), authentication methods
(extended authentication), addresses (local network, remote network,
NAT), to-ZyWALL firewall, firewall
Policy routes, zones, L2TP VPN
Chapter 6 on page 103.
VPN > SSL VPN
Chapter 5 Configuration Basics
91