ZyXEL Communications ZyWall USG 2000 User Manual page 230

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Chapter 11 Trunks

The following table describes the items in this screen.

Table 69 Network > Interface > Trunk

Select this option to have the ZyWALL send all of each local computer's

traffic through one WAN interface for the number of seconds that you

This is useful when a redirect server forwards a local user's request for a file

and informs the file server that a particular WAN IP address is requesting

the file. If the user's subsequent sessions came from a different WAN IP

address, the file server would deny the request. See

for an example.

This setting applies when you use load balancing and have multiple WAN

interfaces set to active mode.

Specify for how long the ZyWALL is to send all of each local computer's

traffic through one WAN interface.

This field displays the label that you specified to identify the trunk.

This field displays the load balancing method that the trunk is set to use.

This column lets you create, edit, and remove trunks.

To create a trunk, click the Add icon at the top of the column. The Trunk

Members screen appears.

To edit a trunk, click the Edit icon next to it. The Trunk Members screen

To remove a trunk, click the Remove icon next to it. The ZyWALL confirms

you want to remove it before doing so.

Click this button to save your changes to the ZyWALL.

Click this button to return the screen to its last-saved settings.

Link Sticking on page

ZyWALL USG 2000 User's Guide

Troubleshooting

Zywall usg 1000