ZyXEL Communications ZyWall USG 2000 User Manual page 585

create entries that check for particular header fields and values or specific subject
text.
Figure 394 Anti-X > Anti-Spam > Black/White List > White List
The following table describes the labels in this screen.
Table 172 Anti-X > Anti-Spam > Black/White List > White List
LABEL
General Settings
Enable White List
Checking
Total Rule
rules per page
Page x of x
#
Type
Content
Add icon
OK
Cancel
ZyWALL USG 2000 User's Guide
DESCRIPTION
Select this check box to have the ZyWALL forward e-mail that
matches (an active) white list entry without doing any more anti-
spam checking on that individual e-mail.
This is the number of entries configured.
Select how many entries you want to display on each page.
This is the number of the page of entries currently displayed and the
total number of pages of entries. Type a page number to go to or use
the arrows to navigate the pages of entries.
This is the entry's index number in the list.
This field displays whether the entry is based on the e-mail's subject,
source or relay IP address, source e-mail address, or a header.
This field displays the subject content, source or relay IP address,
source e-mail address, or header value for which the entry checks.
This column provides icons to add, activate / deactivate, edit, and
remove entries.
To add an entry, click the Add icon at the top of the column. See
Section 35.4.1 on page 582
Click an entry's Active icon to activate or deactivate the entry. Make
sure you click Apply to save and apply the change.
Click an entry's Edit icon to edit the entry. See
page 582 for how to add or edit an entry.
To delete an entry, click the entry's Remove icon. The Web
Configurator confirms that you want to delete the entry.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 35 Anti-Spam
for how to add or edit an entry.
Section 35.4.1 on
585