The Shell Script Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 47 File Manager
The ZyWALL automatically restarts causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 511 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the HOME
screen.
If the upload was not successful, the following message appears in the status bar
at the bottom of the screen.
Figure 512 Firmware Upload Error

47.4 The Shell Script Screen

Use shell script files to have the ZyWALL use commands that you specify. Use a
text editor to create the shell script files. They must use a ".zysh" filename
extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script
screen. Use the Shell Script screen to store, name, download, upload and run
shell script files. You can store multiple shell script files on the ZyWALL at the
same time.
Note: You should include
write
could use multiple
Figure 513 Maintenance > File Manager > Shell Script
760
commands in your scripts. If you do not use the
write
command, the changes will be lost when the ZyWALL restarts. You
commands in a long script.
write
ZyWALL USG 2000 User's Guide