7.2.6 The Port Statistics Screen
Use this screen to look at packet statistics for each Gigabit Ethernet port. To
access this screen, click Port Statistics in the Status screen.
Figure 107 Status > Port Statistics
The following table describes the labels in this screen.
Table 35 Status > Port Statistics
LABEL
Switch to
Graphic View
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up
Time
Poll Interval
Set Interval
Stop
ZyWALL USG 2000 User's Guide
DESCRIPTION
Click this to display the port statistics as a line graph.
This field displays the physical port number.
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the
port speed and duplex setting (Full or Half).
This field displays the number of packets transmitted from the ZyWALL
on the physical port since it was last connected.
This field displays the number of packets received by the ZyWALL on the
physical port since it was last connected.
This field displays the number of collisions on the physical port since it
was last connected.
This field displays the transmission speed, in bytes per second, on the
physical port in the one-second interval before the screen updated.
This field displays the reception speed, in bytes per second, on the
physical port in the one-second interval before the screen updated.
This field displays how long the physical port has been connected.
This field displays how long the ZyWALL has been running since it last
restarted or was turned on.
Enter how often you want this window to be updated automatically, and
click Set Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start
it again by setting the Poll Interval and clicking Set Interval.
Chapter 7 Status
149