ZyXEL Communications ZyWall USG 2000 User Manual page 793

Table 258 Maintenance > Report > Email Daily Report (continued)
LABEL
Mail Subject
Mail From
Mail To
SMTP
Authentication
User Name
Password
Send Report
Now
Time for
sending
report
Report Items
Reset All
Counters
Apply
Reset
ZyWALL USG 2000 User's Guide
DESCRIPTION
Type the subject line for the outgoing e-mail. Select Append system
name to add the ZyWALL's system name to the subject. Select Append
date time to add the ZyWALL's system date and time to the subject.
Type the e-mail address from which the outgoing e-mail is delivered. This
address is used in replies.
Type the e-mail address (or addresses) to which the outgoing e-mail is
delivered.
Select this check box if it is necessary to provide a user name and
password to the SMTP server.
This box is effective when you select the SMTP Authentication check
box. Type the user name to provide to the SMTP server when the log is e-
mailed.
This box is effective when you select the SMTP Authentication check
box. Type the password to provide to the SMTP server when the log is e-
mailed.
Click this button to have the ZyWALL send the daily e-mail report
immediately.
Select the time of day (hours and minutes) when the log is e-mailed. Use
24-hour notation.
Select the information to include in the report. Select Reset counters
after sending report successfully if you only want to see statistics for
a 24 hour period.
Click this to discard all report data and start all of the counters over at
zero.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 49 Reports
793