The Virtual Server Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 16 Virtual Servers
Finding Out More
• See Section 5.4.19 on page 97
• See Section 6.7.2 on page 126
server to allow H.323 traffic from the WAN to the LAN.
• See Section 16.3 on page 278
mapping and manually configuring a policy route rule for NAT loopback.
(Although you can have the ZyWALL automatically configure these for you
instead.)

16.2 The Virtual Server Screen

The Virtual Server summary screen provides a summary of all virtual servers
and their configuration. In addition, this screen allows you to create new virtual
servers and edit and delete existing virtual servers. To access this screen, login to
the Web Configurator and click Network > Virtual Server. The following screen
appears, providing a summary of the existing virtual servers.
Click a column's heading cell to sort the table entries by that column's criteria.
Click the heading cell again to reverse the sort order.
Figure 166 Network > Virtual Server
The following table describes the labels in this screen.
Table 86 Network > Virtual Server
LABEL
Total Virtual
Servers
entries per
page
Page x of x
#
Name
Interface
274
for related information on these screens.
for an example of how to configure a virtual
for examples of manually configuring NAT 1:1
DESCRIPTION
This is how many virtual server entries are configured in the ZyWALL.
Select how many virtual server entries to display per page in the screen.
This is the number of the page of entries currently displayed and the
total number of pages of entries. Type a page number to go to or use the
arrows to navigate the pages of entries.
This field is a sequential value, and it is not associated with a specific
virtual server.
This field displays the name of the virtual server.
This field displays the interface on which packets for the virtual server
were received.
ZyWALL USG 2000 User's Guide