Chapter 28 L2TP VPN Example
Click the Default_L2TP_VPN_Connection entry's Enable icon and click Apply
3
to turn on the entry.
Figure 273 VPN > IPSec VPN > VPN Connection (Enable)
28.4 Configuring the L2TP VPN Settings
Example
Click VPN > L2TP VPN to open the following screen.
1
Figure 274 VPN > L2TP VPN Example
Configure the following.
2
• Enable the connection.
• Set it to use the Default_L2TP_VPN_Connection VPN connection.
• Configure an IP address pool for the range of 192.168.10.10 to
192.168.10.20. It is called L2TP_POOL here.
• This example uses the default authentication method (the ZyWALL's local user
data base).
• Select a user or group of users that can use the tunnel. Here a user account
named L2TP-test has been created.
• The other fields are left to the defaults in this example, click Apply.
416
ZyWALL USG 2000 User's Guide