Chapter 14 Zones
14.3 Zone Edit
The Zone Edit screen allows you to add or edit a zone. To access this screen, go
to the Zone screen (see
Edit icon.
Figure 161 Network > Zone > Edit
The following table describes the labels in this screen.
Table 81 Network > Zone > Edit
LABEL
Name
Block Intra-
zone Traffic
Member List
264
Section 14.2 on page
DESCRIPTION
Type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Select this check box to block network traffic between members in the
zone.
Available lists the interfaces and VPN tunnels that do not belong to any
zone. The word in front of the name indicates whether this member is an
interface or a VPN tunnel.
INTERFACE - this member is an interface.
IPSEC - this member is a VPN tunnel.
Select the interfaces and VPN tunnels that you want to add to the zone
you are editing, and click the right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone.
Select any interfaces that you want to remove from the zone, and click
the left arrow button to remove them.
263), and click the Add icon or an
), or dashes (-), but the first
_
ZyWALL USG 2000 User's Guide