Set Up Available Bandwidth On Ethernet Interfaces; Configure The Wan Trunk - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 6 Tutorials

6.3.1 Set Up Available Bandwidth on Ethernet Interfaces

Here is how to set a limit on how much traffic the ZyWALL tries to send out
through each WAN interface.
Click Network > Interface > Ethernet and the ge2 Edit icon. Enter the
1
available bandwidth (1000 kbps) in the Egress Bandwidth field. Click OK.
Figure 55 Network > Interface > Ethernet > Edit (ge2)
Repeat the process to set the egress bandwidth for ge3 to (512 Kbps).
2

6.3.2 Configure the WAN Trunk

Click Network > Interface > Trunk. Click the WAN_TRUNK Edit icon.
1
In the Load Balancing Algorithm field, select Spillover. After the screen
2
refreshes, click the Add icon at the top of the right-hand column.
In the Load Balancing Algorithm field, select Weighted Round Robin. After
3
the screen refreshes, enter 2 in the Weight column for ge2. Click OK.
Figure 56 Network > Interface > Trunk > WAN_TRUNK > Edit
110
ZyWALL USG 2000 User's Guide