Address Group Add/Edit Screen - ZyXEL Communications ZyWALL USG 1000 User Manual

41.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group
or edit an existing one. To access this screen, go to the Address Group screen
(see Section 41.3 on page
Figure 472 Configuration > Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 195 Configuration > Object > Address > Address Group > Add
LABEL
Name
Description
Member List
OK
Cancel
ZyWALL USG 1000 User's Guide
708), and click either the Add icon or an Edit icon.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive.
This field displays the description of each address group, if any. You can
use up to 60 characters, punctuation marks, and spaces.
The Member list displays the names of the address and address group
objects that have been added to the address group. The order of
members is not important.
Select items from the Available list that you want to be members and
move them to the Member list. You can double-click a single entry to
move it or use the [Shift] or [Ctrl] key to select multiple entries and use
the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first character cannot
_
Chapter 41 Addresses
709