Chapter 5 Configuration Basics
Table 26 Objects Overview
OBJECT
certificates
SSL Application
5.5.1 User/Group
Use these screens to configure the ZyWALL's administrator and user accounts.
The ZyWALL provides the following user types.
Table 27 User Types
TYPE
Admin
Limited-Admin
User
Guest
Ext-User
If you want to force users to log in to the ZyWALL before the ZyWALL routes traffic
for them, you might have to configure prerequisites first.
MENU ITEM(S)
PREREQUISITES
WHERE USED
5.6 System Management and Maintenance
This section introduces some of the management and maintenance features in the
ZyWALL. Use Host Name to configure the system and domain name for the
ZyWALL. Use Date/Time to configure the current date, time, and time zone in
the ZyWALL. Use Console Speed to set the console speed. Use Language to
select a language for the Web Configurator screens.
5.6.1 DNS, WWW, SSH, TELNET, FTP, SNMP, Dial-in Mgmt,
Vantage CNM
Use these screens to set which services or protocols can be used to access the
ZyWALL through which zone and from which addresses (address objects) the
100
WHERE USED
VPN gateways, WWW, SSH, FTP
SSL VPN
ABILITIES
Change ZyWALL configuration (web, CLI)
Look at ZyWALL configuration (web)
Access network services, browse user-mode commands (CLI)
Access network services
The same as a User or a Guest. The ZyWALL looks for the specific
type in an external authentication server. If the type is not available,
the ZyWALL applies default settings.
Object > User/Group
Addresses, address groups, schedules. The prerequisites are only
used in policies to force user authentication
Policy routes, firewall, application patrol, content filter, user groups,
VPN
ZyWALL USG 2000 User's Guide