Snmp - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 46 System
Table 236 System > FTP (continued)
LABEL
Action
Add icon
Apply
Reset

46.10 SNMP

Simple Network Management Protocol is a protocol used for exchanging
management information between network devices. Your ZyWALL supports SNMP
agent functionality, which allows a manager station to manage and monitor the
ZyWALL through the network. The ZyWALL supports SNMP version one (SNMPv1)
740
DESCRIPTION
This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Click the Add icon in the heading row to open a screen where you can
add a new rule. Refer to
fields.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display
asking you to confirm that you want to delete the rule. Note that
subsequent rules move up by one when you take this action.
Click the Move to N icon to display a field to type a number for where
you want to put that rule and press [ENTER] to move the rule to the
number that you typed.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Table 232 on page 720 for information on the
ZyWALL USG 2000 User's Guide