Address Group Add/Edit Screen - ZyXEL Communications UAG5100 User Manual

Figure 300 Configuration > Object > Address > Address Group
The following table describes the labels in this screen. See
information as well.
Table 206 Configuration > Object > Address > Address Group
LABEL
Configuration
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Description
Reference

39.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen (see
click either the Add icon or an Edit icon in the Configuration section.
Chapter 39 Addresses
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
use the entry. See Section 10.3.2 on page 165
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
This displays the number of times an object reference is used in a profile.
UAG Series User's Guide
445
Section 39.3.1 on page 445
for an example.
Section 39.3 on page
for more
444), and