4.2.2 Internet Access: PPPoE Encapsulation
Configure your PPPoE and IP address settings and click Next to apply the
configuration settings. This configures the ZyWALL to access the Internet.
Figure 24 Internet Access: PPPoE Encapsulation
The following table describes the labels in this screen.
Table 9 Internet Access: PPPoE Encapsulation
LABEL
ISP Parameters
Encapsulation
Service Name
Authentication
Type
ZyWALL USG 2000 User's Guide
DESCRIPTION
This displays the type of Internet connection you are configuring.
Type the PPPoE service name given to you by your ISP. PPPoE uses a
service name to identify and reach the PPPoE server. You can use
alphanumeric and -_
@$./
characters long.
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when
requested by this remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accepts PAP only.
MSCHAP - Your ZyWALL accepts MSCHAP only.
MSCHAP-V2 - Your ZyWALL accepts MSCHAP-V2 only.
Chapter 4 Wizard Setup
characters, and it can be up to 64
63