The Service Group Add/Edit Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 39 Services

39.3.1 The Service Group Add/Edit Screen

The Service Group Add/Edit screen allows you to create a new service group or
edit an existing one. To access this screen, go to the Service Group screen (see
Section 39.3 on page
Figure 429 Object > Service > Service Group > Edit
The following table describes the labels in this screen.
Table 198 Object > Service > Service Group > Edit
LABEL
Name
Description
Available
Member
OK
Cancel
642
640), and click either the Add icon or an Edit icon.
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive.
Enter a description of the service group, if any. You can use up to 60
printable ASCII characters.
This field displays the names of the service and service group objects
that can be added to the service group.
Select service and service group objects that you want to be members of
this group and click the right arrow to add them to the member list.
This field displays the names of the service and service group objects
that have been added to the service group. The order of members is not
important. To remove members, select them and click the left arrow.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first character cannot
_
ZyWALL USG 2000 User's Guide