The Anti-Spam Policy Add Or Edit Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Table 168 Anti-X > Anti-Spam > General
LABEL
Add icon
Apply
Reset

35.3.1 The Anti-Spam Policy Add or Edit Screen

Click the Add or Edit icon in the Anti-X > Anti-Spam > General screen to
display the configuration screen as shown next. Use this screen to configure an
anti-spam policy that controls what traffic direction of e-mail to check, which e-
ZyWALL USG 2000 User's Guide
DESCRIPTION
Click the Add icon in the heading row to add a new first entry.
The Active displays whether the entry is enabled or not. Click it to
activate or deactivate the entry. Make sure you click Apply to save and
apply the change.
Click the Edit icon to go to the screen where you can edit the entry on
the ZyWALL.
Click the Add icon in an entry to add an entry below the current entry.
Click the Remove icon to delete an existing entry from the ZyWALL. A
window displays asking you to confirm that you want to delete the entry.
Note that subsequent entries move up by one when you take this action.
In a numbered list, click the Move to N icon to display a field to type an
index number for where you want to put that entry and press [ENTER] to
move the entry to the number that you typed. For example, if you type
6, the entry you are moving becomes number 6 and the previous rule 6
(if there is one) gets pushed up (or down) one.
The ordering of your policies is important as they are applied in order of
their numbering.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 35 Anti-Spam
579