How To Configure A Cellular Interface - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 6 Tutorials
Click Status, and look at the Interface Status Summary. Ethernet interface
3
ge4 has a status of Port Group Up if it is connected or Port Group Down if it is
not connected. Ethernet interfaces ge5 has a Status of Port Group Inactive.
Figure 47 Status: Interface Status Summary After Port Grouping

6.2 How to Configure a Cellular Interface

Use 3G cards for cellular WAN (Internet) connections.
the compatible 3G devices. In this example you install or connect the 3G card
before you configure the cellular interfaces but is also possible to reverse the
sequence.
Make sure the 3G device's SIM card is installed.
1
Install the 3G device in the ZyWALL's PCIMCIA slot or connect it to one of the
2
ZyWALL's USB ports.
Click Network > Interface > Cellular. Click the 3G card's Edit icon.
3
Figure 48 Network > Interface > Cellular
106
Table 261 on page 805
ZyWALL USG 2000 User's Guide
lists