Connecting The Cables - Canon im2020 Setup Instructions

5. Specifying Machine Settings
Priority Device
Specify the print timing for received print jobs.
1. Press the [Utility] key.
2. Touch [User Set].
3. Touch [User's Choice].
4. Touch [Priority Device] on tab 6/6.
5. Select either "Copier" or "Printer", and then touch [OK].
Copier: Printing begins after the data for all pages of the print job is received.
Printer: Printing begins after the data for one page of the print job is received.

6. Connecting the Cables

Use USB cable or LAN cable (either category 5 or 5e) to make the connections.
The USB connector and the connector for the LAN cable are at the rear of the machine.
LAN
4513-7746-02
LED
USB
USB connector
Connector for the LAN
(Only for Europe)
Cable tie
Attach the ferrite cores to the USB cable and LAN cable as near as possible to the machine.
Use the cable ties to attach the ferrite cores to the USB and LAN cables so that the core does not
move out of position or fall off.
LED indicators
LED Color Condition
Green Lit
Off
Flashing
Red Lit
Off
– 7 –
C4514U013AB
Meaning
The LAN is connected correctly.
The copier has not been turned on.
The LAN is not connected correctly.
Data is being sent or received.
Operating at 100 Mbps
Operating at 10 Mbps