Originals Are Not Scanned Clearly
Clean the platen glass and the rear side of the platen glass cover by following the procedure
below.
IMPORTANT
•
If the platen glass or the rear side of the platen glass cover is dirty, the original may not be scanned
clearly, or the size of the original may be detected incorrectly.
1
Clean the platen glass and the rear side of the platen glass cover with a
piece of well-wrung cloth dampened with water, then wipe them with a dry
cloth.
IMPORTANT
•
Be careful not to scratch the silver reflecting surface of the platen glass cover.
Cleaning the Copier
4
4-27