Installing The Copier; Main Unit Installation; Checking The Package Contents; Installation Procedure - Canon PC880 Operator's Manual

Installing the Copier

Main Unit Installation

Checking the Package Contents

Remove the copier and accessories from the shipping box. Make sure that you have all of the accessories
shown below.
A4 Cassette
(250 sheets)
Operator's Manual

Installation Procedure

Select an appropriate installation site. (See "Installation Precautions," on p. 11.) Then, follow the procedure
described below to install the copier.
REQUEST:
Do not insert the copier plug, press the power switch or turn the power ON before completing steps 2 to 5 of "Setting Up the
Copier". If you do, you could damage your copier.
Setting Up the Copier
1
Remove the copier from the shipping bag. Then, peel off all
packing tape attached to the copier.
NOTICE:
If the copier is brought from the cold outdoors into a warm room,
condensation may form and result in an inability to obtain normal copy
images. Under such conditions, allow at least two hours for the copier
to adjust to room temperature before attempting to use it.
...............................
14
Universal Cassette
(250 sheets)
Option
Cartridge E16
(included in the main unit)
Copy tray
EWS Booklet
Installation Instructions
sheet
Warranty Card (UK)
Multi-stack bypass
PC880
Power cord