Printer Configuration - IBM 3 User Manual

Printer Configuration

You can print the current values for each parameter. Here are some considerations:
v Each parameter is shown with its corresponding value printed to the right.
v The category and parameter names are printed in the current display language
v The current custom set is noted at the top right column of the configuration
v If you need to verify each custom set, the Operator Print Tests must be run for
v The custom set must be changed in the configuration menu before running each
v A flag (****) is printed after each parameter value that is different from the
Printer configurations can be checked by entering the configuration menu.
To print the printer configuration:
1. Press Test.
2. Press Scroll
3. Press Enter or Start to begin the test.
4. Press Cancel Print to make the printer ready or Return to make the printer not
278
4247 Model 003 User's Guide
used on the operator panel.
printout.
each custom set.
configuration printout, see Recall Custom Set Values. Depending on your
attachment, see Figure 17 on page 279 or Figure 18 on page 280 for sample
printouts.
factory default value.
or Scroll
4247 OPERATOR PRINT TESTS
Printer Configuration
The Ready indicator goes on and printing begins. The printout shows the
current configuration. The configuration printout is complete when the Ready
indicator goes off.
ready (see "General Test Instructions" on page 273).
until the printer displays