IBM 3 User Manual page 64

Checking and Changing Parameter Values
Checking and changing Configuration Parameter Values is done in the
Configuration Menu, which is entered with the Menu key. The Configuration
Menu is divided into three levels:
v Category
v Parameter
v Value
Note: Do not change Parameter Values during a print job; data may be lost.
Press Menu to enter the Configuration Menu.
The first category in the Configuration Menu is listed on the second line of the
display. Use Scroll or Scroll to scroll through the Categories until the category
you want is displayed. Press Enter to display the first Parameter in the Category
you select. Use Scroll or Scroll to scroll through the Parameters until the
parameter you want to check or change is displayed. Press Enter to display the
current value for the selected Parameter (indicated by an asterisk [*]).
Use Scroll and Scroll to scroll through the other available Values until the value
you want is displayed. Press Enter to select this new value.
When you change the values and do not save them in a custom set, the printer
retains the values until one of the following occurs:
v You power off (O) the printer
v You change the values again
Unless you save the values in a custom set, the values you changed are lost when
you power off (O) the printer . The next time you power on (|) the printer, the
values you saved previously in the Power-On Custom Set, are the values the
printer uses.
See Chapter 4, "Configuration Storage" for information about saving and recalling
parameter values in custom sets.
Configuration changes do not take effect until the printer completes printing the
buffered data (data the printer has in its storage areas).
If you change a parameter (or several parameters) and then decide you do not
want to keep your changes, you can return to the previous value settings by
selecting Quit from Menu from the Configuration Menu. The printer displays
Press Enter to restore the previous values, exit the Configuration Menu, and make
the printer not ready. See Chapter 16, "Quit From Menu" for more information
about restoring previous values.
54
4247 Model 003 User's Guide
CONFIGURATION MENU
Configuration Storage
Quit from Menu
Restore Previous Values