Printer Compatibility 9 (20 Cpi) - IBM 3 User Manual

10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Printer Compatibility 9 (20 CPI)

This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer to allow 20 CPI condensed print from the data stream. For
more information, see the IBM 4247 Printer Model 001 Programming Reference.
You can set this value to:
Enabled (Default)
Disabled
To change or check 20 CPI, follow these steps:
130
4247 Model 003 User's Guide
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Parallel Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Parallel Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Printer Compatibility
8 (Slashed Zero)
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for Slashed Zero is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
Does not allow 20 CPI to be accessed by the data stream.
Allows 20 CPI to be accessed by the data stream.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Parallel Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Parallel Configuration
Printer Compatibility