IBM 3 User Manual page 316

Recovery:
1. Press Stop.
2. See your computer operator for the appropriate action and instructions on
Recovery:
1. Power off (O) the printer.
2. Wait 10 seconds, then power on (|) the printer.
3. If the printer displays this status code again, call for service.
Recovery:
1. Power off (O) the printer.
2. Wait 10 seconds, then power on (|) the printer.
3. If the printer displays this status code again, call for service.
Recovery:
1. Press Stop.
2. Press Start.
There has been a probable loss of data.
Recovery:
1. Press Cancel Print.
2. Press Start.
3. Resubmit your print job.
Configuration and custom sets values may have been lost when the printer board
was modified.
Recovery:
1. Press Stop
2. Press Menu.
3. Verify the configuration values and custom sets.
4. Press Start or Return to exit the Menu.
306
4247 Model 003 User's Guide
which key to press on your printer (PA1 or PA2).
065 NO ATTACHMENT CARD
SEE USER'S GUIDE
066 PRINTER BOARD FAILURE
SEE USER'S GUIDE
068 DATA CLEARED
PRESS STOP THEN START
069 DATA LOST
PRESS CANCEL PRINT
070 PRINTER BOARD CHANGED
VERIFY CONFIGURATION SETTINGS