4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Rear AFTA is displayed.
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
Rear Tear Position
You can adjust the rear tear position for forms loaded in the rear paper path from
-312 to +24 (where each unit is 0.176 mm [1/144 in.]). The default value is 0.
To change or check the Rear Tear Position:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Rear Tear Position is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
Rear Left Margin Alignment
This parameter adjusts the distance of the first print position to the left margin
from 0 to 60 units (where each unit is 0.706 mm [1/36 in.]). The default is 10 units.
The total range of adjustment is 42.36 mm (1.66 in.).
To change or check the Rear Left Margin Alignment:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
Printer Adjustments
Rear AFTA
An asterisk (*) will be displayed in front of the selected value.
on page 55.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Rear Tear Position
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
CONFIGURATION MENU
Printer Adjustments
Chapter 11. Printer Adjustments
163