Loading Forms For Rear Push - IBM 3 User Manual

10. Press Enter.
11. Press Scroll or Scroll until the printer displays
12. Press Enter.
13. Press Scroll or Scroll until the printer displays
14. Press Enter.
15. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Loading Forms for Rear Push

Notes:
1. Before you start this procedure, see Forms Stack Input and Output Locations in
2. If you have installed an ASF unit and you now want to install the rear tractor,
208
4247 Model 003 User's Guide
2. Wait until the message IBM 4247 appears, all the segments of the LCD on the
operator panel display are lighted, and the printer has stopped all motion.
3. Press Menu to enter configuration.
4. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Rear Tractor Use
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Rear Tractor Use
Push
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Return to return to the Configuration Menu.
If you want the Rear-Push forms path to be the default path used, then
continue with steps 9 through 14.
9. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Printer Setup
Printer Setup
Paper Source
Paper Source
Rear
An asterisk (*) will be displayed in front of the selected value.
on page 55 for instructions.
Chapter 19, "Supplies, Optional Features, and Maintenance" for information on
stacking height limits.
you must first power off the printer, remove the ASF stacker, and then reinstall
the stacker after completing installation of the rear tractor.