Ps Print Direction - IBM 3 User Manual

6. Press Scroll or Scroll until the printer displays
Programmed Symbols
Full Page on Skip Suppress
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for full page on skip suppress
is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
on page 55.

PS Print Direction

You can set the PS Print Direction to:
Unidirectional (Default)
The printer will print only as the printhead moves in one direction.
Bidirectional
The printer will print as the printhead moves from left to right and as it
moves from right to left. (This setting causes faster throughput but may
affect print quality. Verify that the print quality is acceptable before
running a print job.)
To change or check the PS print direction, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Programmed Symbols
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Programmed Symbols
PS Print Direction
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for PS print direction is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
on page 55.
Chapter 8. Coax Configuration
115