Serial Interface; Interface Type - IBM 3 User Manual

To change or check the AutoFeed XT setting, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for AutoFeed XT is displayed.
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Serial Interface

Interface Type

This parameter allows you to select the Serial Interface attachment type. You can
set Interface Type to:
v RS-232C (Default)
v RS-422A
To change or check the Interface Type:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display
6. Press Enter to display the current value.
7. Press Scroll or Scroll until the desired value for Interface Type is displayed.
8. Press Enter.
CONFIGURATION MENU
Parallel Configuration
Parallel Configuration
AutoFeed XT
An asterisk (*) will be displayed in front of the selected value.
on page 55.
CONFIGURATION MENU
Parallel and Serial Configuration
Parallel and Serial Configuration
Serial Interface
Serial Interface
Interface Type
An asterisk (*) will be displayed in front of the selected value.
Chapter 9. Parallel and Serial Configuration
137