IBM 3 User Manual page 109

10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
Printer Compatibility 1 (Carriage Return at MPP + 1)
You can set the printer to automatically execute a carriage return at one position
past the current Maximum Print Position value. You can set this value to:
Standard (Default)
Alternate
Note: The printer performs a partial reset to put any change to this parameter
To change or check the carriage return at MPP + 1, follow these steps:
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Printer Compatibility
Screen Buffer Size
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for screen buffer size is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
An automatic new line executes at MPP + 1, then a carriage return
executes. The next print position will be the first print position of the next
line.
No automatic new line executes. The carriage return executes at MPP + 1.
The next print position will be the first print position of the current line.
value into effect when you exit the Configuration Menu with Start or
Return. Buffered data will be lost.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
Chapter 8. Coax Configuration
99