Installing Wire Forms Guide - IBM 3 User Manual

card) to determine the required overlay for your printer, and perform the following
steps to install the correct overlay.
Figure 6. 4247 Printer Operator Panel (All Printers Without Twinax Attachment)
Figure 7. 4247 Printer Operator Panel (Printer With Twinax Attachment)
1. Remove the paper backing from the reverse side of the operator panel overlay.
2. Align the bottom of the overlay and align both sides. Ensure that the placement
3. After being satisfied with the placement, press the overlay in place starting at

Installing Wire Forms Guide

Open the acoustic cover and insert one end of the wire forms guide into a hinge
block. Compress the wire forms guide and insert the other end into the other hinge
block.
10
4247 Model 003 User's Guide
Power
Ready
Processing
Micro PA1
Format/Online Menu
Scroll Enter
Attention
Micro PA2
Quit
Scroll Return
Unit Check
Power
Ready
Processing
Micro
Online
Menu
Scroll Enter
Attention
Display
Micro
Address
Quit
Scroll
Return
Unit Check
you choose for the overlay will allow free movement of the operator panel
keys.
the bottom below the keys, and continue working upwards until the overlay is
pressed into place.
Hex Line Form Start
Print Feed Feed
Park/ Load/ Set Top Stop
Path Eject of Form
Hex Line Form Start
Print Feed
Feed
Park/ Load/ Set Top Stop
Path Eject of Form
Cancel
Print
Test
Cancel
Print
Test