Chapter 5. Changing Attachment Selection
This chapter describes the procedures for setting your printer attachment. Your
printer is capable of attaching individually through a twinax, coax, parallel, LAN,
or serial connection, or with a combination of parallel with a twinax, coax, or serial
connection. The attachments you have depend on what you requested at the time
you placed your order for the printer. To change or check the attachment selection,
follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the desired value is displayed.
5. Press Enter.
6. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
© Copyright IBM Corp. 2002
CONFIGURATION MENU
Attachment
The printer displays
Attachment
* xxxxxx
Where xxxxxx (depending on your currently selected attachment) can be
parallel, twinax, coax, or serial.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
73