IBM 3 User Manual page 233

e. Rotate the paper bail assembly toward the back of the printer, closing it as
far as it will go.
f. Reinstall the ribbon cartridge. (See "Installing Ribbon Cartridge" on
page 291.)
9. Ensure the metal deflector on the forms guide is in the push (open) position.
10. If the metal deflector is in the pull (closed) position, do the following:
a. Grasp the metal deflector with one hand and the plastic rib on the forms
guide with the other hand.
Paper Bail
Assembly
Plastic
Strip
Chapter 17. Setting Up Forms Paths
223