Manual Feed Eject Mode; Bar Code Print Direction - IBM 3 User Manual

Manual Feed Eject Mode

You can set Manual Feed Eject Mode value to:
Top of Form Option (Default)
Automatic Top of Form
To change or check the Manual Feed Eject Mode, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Manual Feed Eject Mode is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Bar Code Print Direction

You can set the Bar Code Print Direction to:
Unidirectional (Default)
Bidirectional
To change or check the bar code print direction, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
154
4247 Model 003 User's Guide
Causes the printer to automatically eject the current form and begin
printing at the first possible print line when you press Load/Eject.
Causes the printer to automatically eject the current form and begin
printing at the first possible print line when you press Load/Eject and the
print buffer is empty. If the print buffer is not empty, the next form loaded
begins printing at the current vertical print position.
CONFIGURATION MENU
Printer Setup
Printer Setup
Manual Feed Eject Mode
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
Causes the printer to print in only one direction, either from left to right or
from right to left, for each of the two passes of bar code printing on a line.
Causes the printer to print as the printhead moves in both directions. (This
setting causes faster throughput but may affect print quality. Verify that the
print quality is acceptable before running a print job.)
CONFIGURATION MENU
Printer Setup