Loading Forms In Front Push Tractors - IBM 3 User Manual

10. Press Start again. The printer will exit the menu and become ready.

Loading Forms in Front Push Tractors

Note: Before starting this procedure, ensure you have single-part, continuous
20
4247 Model 003 User's Guide
Save Current Values
Custom Set A
9. Press Enter.
forms that are at least 210 mm (8.27 in.) wide. You need at least this size
forms to create an offline printout, which will test printer operation.
1. Unlock the locking levers on the tractors. Move the right tractor to the
extreme right.
2. Move the left tractor to the tractor alignment mark.
3. Lock the left locking lever.
4. Open both of the tractor doors.
5. Put the left tractor holes of the form over the left tractor pins. Close the
left tractor door.
6. Move the right tractor until the right tractor holes of the form fit on the
right tractor pins. Ensure that the forms go under the forms jam sensor