Select-In Signal; Autofeed Xt - IBM 3 User Manual

5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Input Buffer Size is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Select-In Signal

This parameter is valid in Epson-FX emulation mode only and instructs the printer
how to handle Select-In Signals. You can set the Select-In Signal to:
Enabled (Default)
Disabled
To change or check the Select-In Signal:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Select-In Signal is displayed.
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

AutoFeed XT

This parameter is valid in Epson-FX emulation mode only and instructs the printer
whether the host will determine if an automatic line feed is performed after a
carriage return.
You can set this value to:
Disabled (Default)
Enabled
136
4247 Model 003 User's Guide
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
The Select-In Signal is ignored and treated as always on.
The printer checks the Select-In Signal from the host.
CONFIGURATION MENU
Parallel Configuration
Parallel Configuration
Select-In Signal
An asterisk (*) will be displayed in front of the selected value.
on page 55.
The function is determined by the setting of Printer Compatibility 3 –
Automatic Line Feed on Carriage Return.
The host determines whether an automatic line feed is performed after a
carriage return.