Print Quality; Print Language - IBM 3 User Manual

Print Quality

You can set the Print Quality for the printer to any of the following values:
v DP (Data Processing) Quality (Default)
v DP Text Quality
v Near Letter Quality (NLQ)
Notes:
1. This parameter can be overridden by the computer.
2. Only Near Letter Quality is valid when either OCR-A or OCR-B is selected as
To change or check the Print Quality, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Print Quality is displayed.
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Print Language

The following print languages are available on the printer when attachment is set
to Coax. The default is marked with an asterisk (*). You can select any print
language that is available for your printer.
Determine the value for the language setting you want from the following table:
94
4247 Model 003 User's Guide
the print language.
CONFIGURATION MENU
Coax Configuration
Coax Configuration
Print Quality
An asterisk (*) will be displayed in front of the selected value.
on page 55.
Table 15. Print Languages
Code Page
37(*)
260
273
274
275
277
278
280
281
Language
USA/Canada/Canadian Bilingual
Canadian French
Austrian/German
Belgian Old
Brazilian
Danish/Norwegian
Finnish/Swedish
Italian
Japanese English