Power-On Custom Set; Power-On Paper Source - IBM 3 User Manual

8. Use Start or Return to exit the Menu. See "Exiting the Configuration Menu" on

Power-On Custom Set

The Power-On Custom Set is the custom set that is used when the printer is turned
on. The Last Used value means the custom set used before the printer was
powered off is to be used as the power-on custom set.
You can change the Power-On Custom Set to:
v Last Used (Default)
v Custom Set A
v Custom Set B
v Custom Set C
v Custom Set D
v Custom Set E
v Custom Set F
v Custom Set G
v Custom Set H
To change or check the power-on custom set, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired custom set for the new power-on
7. Press Enter.
8. Use Start or Return to exit the Menu. See "Exiting the Configuration Menu" on

Power-On Paper Source

The Power-On Paper Source allows you to select which paper source is to be used
when the printer is turned on. The Last Used value means that the paper source
used before the printer was powered off is to be used as the power-on paper
source.
You can change the Power-On Paper Source to:
v Front (Default)
v Rear
v Bin 1
v Bin 2
70
4247 Model 003 User's Guide
page 55.
CONFIGURATION MENU
Configuration Storage
Configuration Storage
Power-On Custom Set
custom set is displayed.
An asterisk (*) will be displayed in front of the selected custom set.
page 55.