Printer Compatibility 5 (Null Suppression) - IBM 3 User Manual

Standard (Default)
Alternate
Note: The printer performs a partial reset to put any change to this parameter
To change or check the form feed last character in print order setting, follow these
steps:
10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Printer Compatibility 5 (Null Suppression)

You can set the printer to print a blank line if a line contains no printable
characters, or you can set the printer to continue printing on the current line. You
can set this value to:
Standard (Default)
102
4247 Model 003 User's Guide
An automatic new line executes after the form feed completes. The next
print position will be the first print position of the second line on the next
form.
The automatic new line is suppressed at the completion of the form feed.
The next print position will be the first print position of the first line of the
next form.
value into effect when you exit the Configuration Menu with Start or
Return. Buffered data will be lost.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Printer Compatibility
4 (FF last in order)
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for form feed is last character
in print order is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
If an entire print line contains no printable character, no new line is done.
Space (X'40') is considered a printable character. The next print position
will be the first print position of the current line.