Quiet; Micro /Scroll Or Micro /Scroll; Adjusting Forms - IBM 3 User Manual

The configuration menu can be locked to prevent an unauthorized user from
changing parameter values. When the configuration menu is locked, the Menu key
is disabled, preventing entry into the configuration menu. The Printer Adjustments
in the Operator Print Tests Menu are also disabled.
If the Menu is locked, the printer displays:
For more information on the Menu Lock function, see your system programmer or
the IBM 4247 Printer Model 001 Programming Reference.
For more information on configuration parameters and values, see "Checking and
Changing Parameter Values" on page 54.

Quiet

The Quiet function key is a toggle key. If you press Quiet when the printer is
running in normal mode, the printer switches to Quiet mode and Quiet displays
on the operator panel. If you press Quiet when the printer is running in Quiet
mode, the printer returns to printing normally. Pressing this key causes the
reduction of the printing noise level by two to three decibels. It also reduces the
printers throughput by one half.

Micro /Scroll or Micro /Scroll

Use Micro /Scroll or Micro /Scroll to perform the following functions:
v Adjust forms upward or downward when the printer is not ready.
v Scroll through the Configuration Menu categories, parameters, and values.
v Scroll through the Operator Print Tests menu items.

Adjusting Forms

Press Micro or Micro to move the form 0.176 mm (1/144 in.) in the direction of
the arrow each time you press the key. If you continue to hold down the Micro
key, the forms move continuously until you release the key.
When the printer is at the top of the forms and the Micro keys are used, the new
forms position is now the top of forms.
The Micro and Micro keys replace the forms advance knob found on other
printer products.
Note: If you use these keys when the Processing indicator is blinking, the top of
42
4247 Model 003 User's Guide
097 FUNCTION NOT AVAILABLE
MENU LOCKED
form position could become misaligned.