Front Forms Backup - IBM 3 User Manual

2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for ASF Bin Linking is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Front Forms Backup

This parameter is displayed as long as the front continuous forms paper source is
available. The Front Forms Backup parameter instructs the printer whether it can
perform tractor movements that would back the forms up. Such movements
include parking the printer. This would be used when the physical characteristics
of the forms currently loaded make it undesirable for the printer to attempt to
move the forms in the reverse direction (for example, labels).
Even if Front Forms Backup is disabled, the Micro can still be used for the paper
path. You can define the front forms backup to either one of the following values:
Enabled (Default)
Disabled
To change or check the Front Forms Backup:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Front Forms Backup is
7. Press Enter.
146
4247 Model 003 User's Guide
CONFIGURATION MENU
Printer Setup
Printer Setup
ASF Bin Linking
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
Allows the printer to back up the front forms as needed.
Prevents the printer from backing up front forms. Use this setting for
labeled continuous forms.
CONFIGURATION MENU
Printer Setup
Printer Setup
Front Forms Backup
displayed.