10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
Maximum Page Length
This parameter allows the printer to accept or ignore (override) the Maximum
Page Length commands that are sent by the host data stream. You can set
Maximum Page Length to:
Disabled (Default)
Enabled
To change or check the Maximum Page Length setting:
134
4247 Model 003 User's Guide
6. Press Scroll or Scroll until the printer plays
Parallel Configuration
Lines Per Inch
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for Lines Per Inch is displayed.
9. Press Enter to display the current value.
An asterisk (*) is displayed in front of the selected value.
on page 55.
The printer accepts and processes commands received from the host data
stream for Maximum Page Length selection.
The printer ignores commands received from the host data stream for
Maximum Page Length. The printer will use the Maximum Page Length
value set in the printer configuration.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Parallel and Serial Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Parallel Configuration
Override Host
5. Press Enter, and the printer displays
Parallel Configuration
Paper Source
6. Press Scroll or Scroll until the printer plays
Parallel Configuration
Maximum Page Length
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for Maximum Page Length is
displayed.
9. Press Enter to display the current value.
An asterisk (*) is displayed in front of the selected value.