Screen Buffer Size - IBM 3 User Manual

Alternate (default)
The media size is defined by the MPP and MPL parameters.
To change or check the Media Size Priority, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for media size priority is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Screen Buffer Size

You can set the screen size for local copy printing. You can define the screen size to
any of the following values:
v
v 1920 (Default)
v 2560
v 3440
v 3564
Note: The printer performs a partial reset to put any change to this parameter
To change or check the screen buffer size, follow these steps:
98
4247 Model 003 User's Guide
The XOH-SMS order values have priority. If an XOH-SMS order is present,
its values will be used to define the page size instead of the operator panel
settings.
CONFIGURATION MENU
Coax Configuration
Coax Configuration
Media Size Priority
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
960
value into effect when you exit the Configuration Menu with Start or
Return. Buffered data will be lost.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.