Manual Feed Left Margin Alignment; Manual Feed Paper Load Position - IBM 3 User Manual

8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Manual Feed Left Margin Alignment

This parameter adjusts the distance of the first print position to the left margin
from 0 to 60 units (where each unit is 0.706 mm [1/36 in.]). The default is 10 units.
The total range of adjustment is 42.36 mm (1.66 in.).
To change or check the Manual Feed Left Margin Alignment:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Manual Feed Left Margin
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
Note: If the manual feed left margin alignment is too large for the current print

Manual Feed Paper Load Position

This parameter adjusts the distance of the first printable line to the top of the
paper from -24 to +576 units (4 in.) (where each unit is 0.176 mm [1/144 in.]). The
default value is 0.
To change or check the Manual Feed Paper Load Position:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
on page 55.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments

Manual Feed Left Margin Alignment

Alignment is displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
line, an 005 MARGIN ERROR ADJUST MARGIN OR LINE LENGTH will occur. For
more information on the message, see Chapter 20, "Problem Solving" on
page 295.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments

Manual Feed Paper Load Position

Chapter 11. Printer Adjustments
171