Printer Compatibility 7 (Condensed Print); Printer Compatibility 8 (Slashed Zero) - IBM 3 User Manual

10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Printer Compatibility 7 (Condensed Print)

This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer CPI value for condensed print when a Shift In control is
received from the data stream. For more information, see the IBM 4247 Printer
Model 001 Programming Reference.
You can set this value to:
v 15
v 16.7
v 17.1 (Default)
To change or check condensed print, follow these steps:
10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Printer Compatibility 8 (Slashed Zero)

You can set this value to:
Disabled (Default)
Enabled
To change or check the slashed zero, follow these steps:
on page 55.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Parallel Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Parallel Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Printer Compatibility
(Condensed Print)
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for Condensed Print is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
All printed zeros will appear without a slash.
All printed zeros will appear with a slash.
Chapter 9. Parallel and Serial Configuration
129