Recall Custom Set Values - IBM 3 User Manual

6. Press Scroll or Scroll until the desired custom set value is displayed.
7. Press Enter.
8. Use Start or Return to exit the Menu. See "Exiting the Configuration Menu" on

Recall Custom Set Values

The Recall Custom Set values recalls configuration parameters previously stored.
(Custom sets are described in "Custom Sets" on page 67.)
You can recall current values from:
v Custom Set A
v Custom Set B
v Custom Set C
v Custom Set D
v Custom Set E
v Custom Set F
v Custom Set G
v Custom Set H
Note: When a new custom set is recalled, a partial reset is automatically
To recall custom set values, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired custom set value is displayed.
7. Press Enter. The printer displays a message similar to
Note: If you have previously created a custom set definition for that letter, that
information will be replaced with the new information when you press
Enter.
The printer displays a message similar to
Save Current Values
Custom Set A Saved
page 55. The display will be updated to show the new custom set that is in use.
See "Custom Set In-Use Indicator" on page 40.
performed when exiting from the configuration menu if the value of at least
one of the parameters that requires a partial reset has been changed.
Buffered data will be lost.
CONFIGURATION MENU
Configuration Storage
Configuration Storage
Recall Custom Set Values
Recall Custom Set
Custom Set A Recalled
Chapter 4. Configuration Storage
69