Characters Per Inch (Cpi) - IBM 3 User Manual

Enabled
To change or check the Paper Source:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter, and the printer displays
6. Press Enter to display the current value.
7. Press Scroll or Scroll until the desired value for Paper Source is displayed.
8. Press Enter.
9. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Characters Per Inch (CPI)

This parameter allows the printer to accept or ignore (override) the Characters Per
Inch commands that are sent by the host data stream. You can set Characters Per
Inch to:
Disabled (Default)
Enabled
To change or check the Characters Per Inch setting:
132
4247 Model 003 User's Guide
The printer ignores commands received from the host data stream that
specify paper source selection. The printer will use the paper source
selected at the operator panel. Commands sent from the host cannot
override the paper source selected at the operator panel.
CONFIGURATION MENU
Parallel and Serial Configuration
Parallel Configuration
Override Host
Parallel Configuration
Paper Source
An asterisk (*) will be displayed in front of the selected value.
on page 55.
The printer accepts and processes commands received from the host data
stream, for Characters Per Inch selection.
The printer ignores commands received from the host data stream, for
Characters Per Inch. The printer will use the Characters Per Inch value set
in the printer configuration.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Parallel and Serial Configuration
3. Press Enter.